The best flat roof roofing material is without a doubt a single sheet of rubber custom made for weather-proofing flat roofs, such as for example Firestone’s EPDM product.
That is laid directly onto roof boarding, itself supported by the roof rafters and nagging. Insulating material is normally laid in the space between the two, and if you’re renewing your flat roof anyway you might as well take the opportunity of renewing that as well.
This will almost certainly be the recommendation you obtain from any reputable builder or roofer advising you on replacing your existing flat roof.
Until recently the most famous material for a new flat roof was bituminous felt laid in three layers, the initial layer nailed down and top of the two bonded to the one beneath with mastic bitumen. According to the material used, this may mean heating a solid bitumen-based compound to make it liquid, and then pouring it onto the underlying felt and spreading it evenly on the whole area of the roof.
Then you had to hold back for the compound to cool before applying the next layer, and by the end spreading a layer of stone chippings over the roof and bonding it with a chipping compound, this being to reflect natural sunlight and prevent the felt and bitumen degrading quickly.
This was altogether a fairly messy, complicated and time-consuming job best left to the professionals. In addition, there have been several stages where it was very easy to fail to make the roof weather-proof, e.g. where the edge of the felt met the existing tile or slate roofing of the pitch roof.
In addition, if, or rather when, there developed a leak in the flat roof, it would be very difficult and messy to find out exactly where the rain was getting in. Seldom would Roof Cleaning in Nottingham of the leak on the ceiling of the area below be directly below the source of it. Water could easily get by way of a weakness in the bitumen felt and travel along a rafter before descending to the ceiling board below.
The brand new generation of rubber-based flat roofing systems are far superior. When you have reasonable DIY abilities then you can certainly probably do-it-yourself, with one other person to aid. You can easily find a local supplier of rubber flat roof roofing material online, and the existing price is around �6.65 per square metre.
Most suppliers slice the material to the exact size and shape that you require so are there no unnecessary joins, meaning no weaknesses and an extremely long-lasting, leak-proof roof.
The vital portion of the whole process is to make sure that there are no gaps between your rubber roof and any existing pitch roof where rain could possibly penetrate. To ensure you can find no problems it is vital to run the rubber material up and under the tiles or slates of the adjoining pitch roof so that any rain dripping from the lower-most row falls onto the rubber, without chance for it over-lapping the edge and getting within the pitch roof.
Also, make sure that the existing slope of the flat roof towards the guttering or other method of water escape is maintained. The rubber is merely glued onto the roof boards and sealed where appropriate with metal brackets or bitumen so that rain penetration is impossible. Mind that the glue covers the entire underneath of the rubber in order to avoid bumps in the top that could obstruct the drainage of the water away.
Rubber roofs have been proven to last for well over 50 years under all weathers, so it really is the only flat roof roofing material that you need to consider when deciding on a fresh flat roof.